DOI:10.35833/MPCE.2020.000870 |
| |
| |
Multi-objective Dynamic Reconfiguration for Urban Distribution Network Considering Multi-level Switching Modes |
| |
|
| |
Page view: 0
Net amount: 363 |
| |
Author:
Hongjun Gao1,Wang Ma1,Yingmeng Xiang3,Zao Tang1,Xiandong Xu2,Hongjin Pan1,Fan Zhang1,Junyong Liu1
|
Author Affiliation:
1.College of Electrical Engineering, Sichuan University, Chengdu 610065, China;2.Key Laboratory of Smart Grid of Ministry of Education, Tianjin University, Tianjin 300072, China;3.Iowa State University,Ames, Iowa 50010, USA
|
Foundation: |
This work was supported by the National Key R&D Program of China (No. 2019YFE0123600), National Natural Science Foundation of China (No. 52077146), and Young Elite Scientists Sponsorship Program by CSEE (No. CESS-YESS-2019027). |
|
|
Abstract: |
The increasing integration of photovoltaic generators (PVGs) and the uneven economic development in different regions may cause the unbalanced spatial-temporal distribution of load demands in an urban distribution network (UDN). This may lead to undesired consequences, including PVG curtailment, load shedding, and equipment inefficiency, etc. Global dynamic reconfiguration provides a promising method to solve those challenges. However, the power flow transfer capabilities for different kinds of switches are diverse, and the willingness of distribution system operators (DSOs) to select them is also different. In this paper, we formulate a multi-objective dynamic reconfiguration optimization model suitable for multi-level switching modes to minimize the operation cost, load imbalance, and the PVG curtailment. The multi-level switching includes feeder-level switching, transformer-level switching, and substation-level switching. A novel load balancing index is devised to quantify the global load balancing degree at different levels. Then, a stochastic programming model based on selected scenarios is established to address the uncertainties of PVGs and loads. Afterward, the fuzzy c-means (FCMs) clustering is applied to divide the time periods of reconfiguration. Furthermore, the modified binary particle swarm optimization (BPSO) and Cplex solver are combined to solve the proposed mixed-integer second-order cone programming (MISOCP) model. Numerical results based on the 148-node and 297-node systems are obtained to validate the effectiveness of the proposed method. |
Keywords: |
Binary particle swarm optimization (BPSO) ; dynamic reconfiguration ; multi-level switching ; mixed-integer second-order cone programming (MISOCP) ; urban distribution network (UDN). |
| |
Received:December 18, 2020
Online Time:2022/09/24 |
| |
|
|
View Full Text
Download reader
|
|
|